Arm Kneader is an ideal equipment , design for mixing , kneading , crushing , dispersing high viscosity plastic materials , and has good performance in uniform mixing , no dead ends and high efficiency kneading It has six major components . kneading part , base part , the transmission system , vacuum system , hydraulic system , electric control system , etc .Place of all the contact material is made of stainless steel . There are three choices of oil circulation , electric heating , steam and water cooling.The heating and cooling can be carried out according to the requirements made of the cylinder jacket , wallboard jacket ,stirring blade pass water through hot oil structure . Discharge hydraulic cylinder turned ; screw the material under the loading and other forms .The paddle shaft seal with a unique equilibrium structure of the vacuum tank to prevent the the fillers wear particles into the cylinder , particularly favorable to improve the system vacuum and material purity.It is widely used in many industries : high viscosity sealant , silicone rubber , BMC , adhesive , also , used in batteries , ink , pigments , dyes , pharmaceuticals , resins , plastics , rubber ,
8474390000
1) Kneading machine does very well in mixing, kneading, crushing and dispersing for high viscosity liquid materials, with no dead point.
2)Two sigma or Z-type blades.
3)Equipped with inverter for frequency control.
4)Vacuum and high pressure are available
5)The cylinder is opened hydraulically.
6)Discharge mode: Hydraulic tilting, Bottom pumping,or Screwing.
7)With jacket outside of the cylinder, for heating or cooling.
8)Heating mode: Hot oil, Electric or Steam.
9)All the parts that contact with material are made of stainless steel.
ZhuoyuanJacketed Heating Vacuum Kneading Machine (NHZ-600)
| Model |
Effective volume
(L) |
Motor power
(KW) |
Speed
Fast, slow(rpm) |
Discharge method |
Heating method |
Vacuum degree
MPa |
Flipping cylinder
Discharge |
Bottom
Discharge |
Screw
Discharge |
Electric heating |
Steam |
Oil circulation |
| LXNHZ-3 |
2 |
0.75 |
42/28 |
√ |
|
|
√ |
√ |
√ |
-0.096 |
| LXNHZ-5 |
3 |
1.5 |
42/28 |
√ |
|
|
√ |
√ |
√ |
-0.096 |
| LXNHZ-20 |
12 |
3 |
42/28 |
√ |
|
|
√ |
√ |
√ |
-0.096 |
| LXNHZ-50 |
30 |
4 |
42/28 |
√ |
|
|
√ |
√ |
√ |
-0.096 |
| LXNHZ-100 |
60 |
5.5 |
42/28 |
√ |
√ |
|
√ |
√ |
√ |
-0.096 |
| LXNHZ-200 |
120 |
7.5-11 |
42/28 |
√ |
√ |
√ |
√ |
√ |
√ |
-0.096 |
| LXNHZ-300 |
180 |
11-15 |
42/28 |
√ |
√ |
√ |
√ |
√ |
√ |
-0.096 |
| LXNHZ-500 |
300 |
22-37 |
32/22 |
√ |
√ |
√ |
√ |
√ |
√ |
-0.096 |
| LXNHZ-1000 |
600 |
37-55 |
32/22 |
√ |
√ |
√ |
√ |
√ |
√ |
-0.096 |
| LXNHZ-2000 |
1200 |
55-90 |
32/22 |
√ |
√ |
√ |
√ |
√ |
√ |
-0.096 |
| LXNHZ-3000 |
1800 |
75-110 |
32/22 |
|
√ |
√ |
|
√ |
√ |
-0.096 |
Introduction:
The white latex reaction kettle is a typical main reaction equipment in the production of chemical raw materials, and is widely used in the production of chemical raw material products. By stirring, heating, and cooling, various materials are dispersed and mixed for reactive polymerization. Its structure generally consists of a kettle body, a transmission device, a stirring device, a heating device, a cooling device, and a sealing device. Corresponding supporting auxiliary equipment: distillation column, condenser, water separator, collection tank, filter, etc.
It is widely used in the production of chemical raw materials such as resin, unsaturated resin, epoxy resin, phenolic resin, curing agent, c, foaming agent/adhesive, 107 adhesive, 108 adhesive, pu adhesive, white latex, adhesive, lotion, acrylic lotion, wallpaper adhesive, pressure sensitive adhesive, runway adhesive, dry hanging adhesive, marble adhesive, civil adhesive, construction adhesive, ab adhesive, paint | coating, silica gel, lithium ion battery anode material, etc. Technical parameters:
Design volume: 50L-35000L (volume can be designed according to requirements.) Reaction temperature: room temperature -300 ºC or higher, depending on operating conditions. Reaction pressure: ± 0.1mpa (normal pressure)
Equipment materials: sus304 stainless steel, sus321 stainless steel, sus316 stainless steel, or q235-b carbon steel.
Mixing forms: blade type, anchor blade type, frame type, screw belt type, turbine type, dispersed disc type, combination type, etc.
Heating methods: electric heating, steam heating, water bath heating. Thermal conductive media: thermal oil, steam, hot water, electric heating. Heat transfer structure: jacket type, outer half tube type, inner coil tube type.
Mixing speed: The selection of mixing speed depends on the needs of material mixing; Conventional liquid material polymerization reaction, with a speed of 63-85r/min; When mixing powder materials with liquids, it is necessary to achieve a dispersion effect at a speed of 0-1460r/min; Emulsification effect needs to be achieved by mixing oil and liquid or two incompatible liquids at a speed of 0-2800 r/min. Structural properties:
1. Complete production equipment for unsaturated resin, alkyd resin, acrylic resin, polyurethane, etc;
2. Complete production equipment for latex, white latex, rubber coating, film coating, universal adhesive, etc;
3. Complete production equipment for glass, plastic, silicone rubber, sealant, etc;
4. Complete set of production equipment for raw rubber;
5. Complete production equipment for thermal decomposition recovery of silicone waste and distillation recovery of old solvents;
6. Complete production equipment for hot melt adhesive;
7. Complete production equipment for various types of powder mixing and twisting dragons;
8. Design, production, and installation of various non-standard chemical equipment
Excellent and extraordinary, setting sail for a long journey, the company upholds the spirit of perseverance and perseverance, never forgetting its original intention, and strives to become a world-class equipment overall solution supplier.
Foshan Zhuoyuan Intelligent Equipment Co., Ltd. is a professional manufacturer of electromechanical integration equipment in fine chemical and related fields. The company takes technology as the guide and is committed to the application of advanced technology at home and abroad, focusing on serving small and medium-sized chemical enterprises
Interactive communication, close attention to diverse customer needs, continuous improvement and innovation, meeting customer requirements, achieving a win-win situation between customers, and achieving global product layout
The equipment we can provide includes: resin complete set equipment, dispersion equipment, mixing equipment, powder mixing equipment, cracking kettle silicone oil kettle complete set production equipment, glass glue MS glue complete set production equipment, double planetary power mixer series, etc. We can complete the overall design, integration, and installation of production lines in related fields with our products as the core. We can provide service technology and equipment support for many fields such as coatings, inks, printing and dyeing auxiliaries, adhesives, liquid detergents, cosmetics, building materials, food, etc
){kind=link}
){kind=link}